Assessment of Quality Control and Occupational Health and Safety Hazards in a Veneer Production Firm in Ghana

Authors

  • Francis Kofi Bih University of Skills Training and Entrepreneurial Development, https://orcid.org/0000-0002-5197-5516
  • Issah Chakurah University of Cape Coast https://orcid.org/0000-0002-2055-0769
  • Eric Mustapha Naah Nusrat Jahan Ahmadiyya College of Education
  • Adamu Wahab University of Skills Training and Entrepreneurial Development
  • Mark Bright Donkor University of Skills Training and Entrepreneurial Development

Keywords:

veneer manufacturing, quality control, occupational health and safety, wood dust, personal protective equipment, safety management

Abstract

Veneer manufacturing integrates mechanical processing, wood dust generation, thermal processes, chemical use, moving machinery and combustible materials, making product quality and occupational safety closely interconnected. This study assessed employees’ knowledge of quality control, occupational health and safety (OHS), safety practices, and strategies for improving quality and safety in a veneer production firm in Kumasi, Ghana. A cross-sectional survey using structured questionnaires yielded 216 usable responses (203 employees and 13 managers) from 233 questionnaires distributed (92.7% response rate). Data were analysed using descriptive statistics and item-level analysis of variance (ANOVA) across years of service, educational level, job designation and job operation. Managers demonstrated moderate-to-high practical quality control knowledge (M = 3.21, SD = 1.339), although knowledge of formal standards was limited. Employees’ OHS knowledge was relatively low (M = 2.90, SD = 1.219) with notable gaps in policies, chemical protection, emergency procedures and hazard prevention. Safety practices were uneven, with stronger PPE and security practices but weaker fire protection and signage. Most group differences were nonsignificant, except for education-related differences in knowledge of approved equipment and chemicals (F = 4.189, p = .005). Strengthening training, inspections, communication, worker participation and policy review is recommended.

Downloads

Download data is not yet available.

Author Biographies

Francis Kofi Bih, University of Skills Training and Entrepreneurial Development,

Department of Wood Science and Technology Education

Issah Chakurah, University of Cape Coast

Department of Vocational and Technical Education

Eric Mustapha Naah, Nusrat Jahan Ahmadiyya College of Education

Department Maths and Technical Education

Adamu Wahab, University of Skills Training and Entrepreneurial Development

Department of Construction Technology and Management Education

Mark Bright Donkor, University of Skills Training and Entrepreneurial Development

Department of Wood Science and Technology Education

References

Prakosa GG, Pradipta NN, Prahadjo A, Imamah SN, Utomo A. Quality improvement in meranti plywood manufacturing using Six Sigma DMAIC and the seven basic quality tools. BioResources. 2026;21(3):7592–7611. DOI: https://doi.org/10.15376/biores.21.3.7592-7611

Qiu Q, Cool J. Transitioning to data-driven quality control in industrial veneer drying: A case study. Eur J Wood Wood Prod. 2023;81(4):1033–44. DOI: https://doi.org/10.1007/s00107-023-01949-0

Yılmaz M, Kökten ES. Statistical process control applications in plywood manufacturing. Pamukkale Univ J Eng Sci. 2024;30(2):155–62. DOI: https://doi.org/10.5505/pajes.2023.59844

Anaya Aguilar RM, Torrecilla García JA, Rubio Romero JC. Delphi assessment of the management of risk factors for exposure to wood dust generated in the handling of wood or wood composite materials in work activities in Spain. J Clean Prod. 2025;494:e144692. DOI: https://doi.org/10.1016/j.jclepro.2025.144692

Mroczek A, Kasperczyk J. Occupational exposure to wood dust: Legal aspects and preventive strategies. Medycyna Pracy. 2026;77(1):61–70. DOI: https://doi.org/10.13075/mp.5893.01668

Simpson AT, Beattie H, Lekka C, Keen C. Health and Safety Executive research on wood dust exposure controls in British manufacturing. Ann Work Expos Health. 2024;68(2):180–91. DOI: https://doi.org/10.1093/annweh/wxad073

Adamčík L, Šugárová V, Kminiak R, Schmidtová J, Banski A, Galajda P. Optimisation of technological parameters of CNC milling of plywood depending on surface roughness. Eur J Wood Wood Prod. 2025;83(3). DOI: https://doi.org/10.1007/s00107-025-02272-6

Madiope S, Van Der Merwe JP, Meincken M. The effect of plantation grown pine species selections and processing parameters on veneer recovery for plywood production. Eur J Wood Wood Prod. 2025;83(5). DOI: https://doi.org/10.1007/s00107-025-02307-y

Chamba PS, Baatjies R, Singh TS, Cumbane AJ, Jeebhay MF. Exposure characterisation of wood dust particulate, endotoxins, and (1–3) beta-D-glucans, and their determinants in Mozambiquan wood processing workers. Ann Work Expos Health. 2023;67(4):485–95. DOI: https://doi.org/10.1093/annweh/wxac100

Ennin IE, Adzaku FK, Dodoo D, Maalman RS. Effects of mixed hardwoods dust on respiratory function and blood immunoglobulin levels in wood workers. Heliyon. 2024;10(4):e26358. DOI: https://doi.org/10.1016/j.heliyon.2024.e26358

Ennin IE, Frempong MA, Yeboah FA, Maalman RS. Assessment of pulmonary function among woodworkers exposed to mixed tropical hardwood dust in Kumasi, Ghana. Afr Health Sci. 2025;25(4):150–9. DOI: https://doi.org/10.4314/ahs.v25i4.16

Chamba PS, Baatjies R, Singh T, Jeebhay MF. Work-related airways disease and risk factors in Mozambiquan wood processing workers. Occup Med. 2025;75(8):526–34. DOI: https://doi.org/10.1093/occmed/kqaf090

Engelbrecht I, Horn SR, Du Plessis JL. A systematic review of the health effects of Acacia, Eucalyptus, and Pinus wood dust: Implications for South African occupational exposure limits. J Occup Environ Hyg. 2025:1–19. DOI: https://doi.org/10.1080/15459624.2025.2555302

Mitchual SJ, Donkoh M, Bih F. Assessment of safety practices and injuries associated with wood processing in a timber company in Ghana. Open J Safety Sci Technol. 2015;5(1):10–9. DOI: https://doi.org/10.4236/ojsst.2015.51002

Donkoh MB, Dartey E, Mensah P, Mensah A. Impact of training on occupational health and safety of woodworkers at a wood processing village in Ghana. Glob J Eng Technol Adv. 2024;14(3):7–18. DOI: https://doi.org/10.30574/gjeta.2023.14.3.0216

Chandrasari SH, Syahrullah Y. Penerapan Statistical Process Control (SPC) dan Fault Tree Analysis (FTA) dalam pengendalian kualitas plywood untuk mengurangi defect pada pabrik kayu di Purbalingga. J Media Teknol Dan Sist Ind. 2022;6(2):e1884. DOI: https://doi.org/10.35194/jmtsi.v6i2.1884

Cool J, Qiu Q. Optimisation of energy consumption during industrial veneer drying. Drvna Industrija. 2024;75(3):331–6. DOI: https://doi.org/10.5552/drvind.2024.0161

Ozturk H. Prediction of optimum veneer drying parameters with artificial neural networks for production of plywood with high mechanical properties. Drvna Industrija. 2023;74(3):297–308. DOI: https://doi.org/10.5552/drvind.2023.0074

Pipíška T, Bekhta P, Král P, Paschová Z. Effects of different pressures and veneer moisture content in adjacent layers on properties of PUF-bonded plywood. J Adhes Sci Technol. 2023;38(7):1043–52. DOI: https://doi.org/10.1080/01694243.2023.2248694

Demirkir C, Özsahin Ş, Aydin I, Colakoglu G. Optimisation of some panel manufacturing parameters for the best bonding strength of plywood. Int J Adhes Adhes. 2013;46:14–20. DOI: https://doi.org/10.1016/j.ijadhadh.2013.05.007

Kymäläinen M, Yamamoto A, Sokka K, Rautkari L. The effect of compression and incision on wood veneer and plywood physical and mechanical properties. Wood Mater Sci Eng. 2018;15(2):97–103. DOI: https://doi.org/10.1080/17480272.2018.1491621

Vashishtha S. Plywood proficiency: Navigating quality assurance in manufacturing. Am J Constr Build Mater. 2024;8(2):52–61. DOI: https://doi.org/10.11648/j.ajcbm.20240802.13

Azizah SN, Indrasari LD. Implementasi green supply chain pada industri manufaktur untuk mengurangi produk defect produksi plywood pada PT. SXX. J Rekayasa Sist Ind. 2025;11(1):20. DOI: https://doi.org/10.33884/jrsi.v11i1.10634

Susanti HD. Risk prevention of plywood product defects using Failure Mode Effect Analysis in the Indonesian plywood processing industry. Wood Mater Sci Eng. 2023;18(6):2049–59. DOI: https://doi.org/10.1080/17480272.2023.2214527

Elfatih NM, Ali IA, Mohammed MA, Ahmed IA, Alaagib NA, Musa OA. Wood dust effects on carpenters' pulmonary function test parameters: A comparative study. BMC Pulm Med. 2025;25(1):62. DOI: https://doi.org/10.1186/s12890-025-03535-x

Straumfors A, Pedersen I, Brinchmann EZ, Ervik TK, Afanou A, Anmarkrud KH, et al. Impact of air recirculation and humidification systems on wood dust exposure during woodworking. Ann Work Expos Health. 2025;69(6):652–64. DOI: https://doi.org/10.1093/annweh/wxaf027

Fakultas Teknik, Universitas Widyatama. Analisis risiko keselamatan dan kesehatan kerja (K3) dengan metode HIRADC (Hazard Identification, Risk Assessment & Determining Control). 2025 [acceso 01/09/2026];1(1):55–71. Disponible en: https://journal.widyatama.ad.id/index.php/isme/article/download/3039/1261

Irhamna NA. Wood dust exposure as a risk factor for respiratory disorders in furniture workers: A systematic review. Preventif Jurnal Kesehatan Masyarakat. 2025;16(1):77–90. DOI: https://doi.org/10.22487/preventif.v16i1.1884

Rathipe M, Raphela FS. Assessment of occupational exposure to noise among sawmill workers in the timber processing factories. Appl Artif Intell. 2022;36(1). DOI: https://doi.org/10.1080/08839514.2022.2110696

Gutiérrez Álvarez R, Guerra K, Gutiérrez M. Psychosocial risks of workers in the plywood industry: A cross-sectional study in the Ecuadorian Amazon region. Heliyon. 2024;10(13):e33724. DOI: https://doi.org/10.1016/j.heliyon.2024.e33724

Moon K. Effect of a safety leadership training including coaching on safety performance and climate in wood processing companies. Saf Health Work. 2024;15(3):310–6. DOI: https://doi.org/10.1016/j.shaw.2024.05.005

Ajmal M, Isha ASN, Nordin SM, Sabir AA, Munir A, Al Mekhlafi ABA, et al. Safety management paradigms: COVID-19 employee wellbeing impact on occupational health and safety performance. J Hunan Univ Nat Sci. 2021 [acceso 01/09/2026];9(3):15–33. Disponible en: https://jonuns.com/index.php/journal/article/view/556/553

Wahab A, Zebilila MDH, Babalola O, Isaac G, Adu-Poku J. Safety performance indicators in Ghana's construction sector: Compliance, culture, and barriers. J Civil Eng Front. 2026;7(1):24–35. DOI: https://doi.org/10.38094/jocef701126

Wahab A, Ghartey I, Ansah AO, Acquah E, Mozu-Simpson M, Aidoo EKF, et al. Technological Innovation and Safety Outcomes on Ghanaian Construction Sites: A Role-Based and Project-Type Analysis. Int J Sci Res Sci Technol. 2025;12(4):634–54. DOI: https://doi.org/10.32628/IJSRST251335

Narayan P, Arutchelvan V, Jacob S, Warimani M, Khan SA, Sonachalam M, et al. SPSS analysis for predicting the occupational health and safety of sawmill workers in the wood processing industries in Kerala, India. Discover Sustain. 2025;6(1). DOI: https://doi.org/10.1007/s43621-025-01440-1

Adei D, Kunfaa EY. Occupational health and safety policy in the operations of the wood processing industry in Kumasi, Ghana. J Sci Technol. 2007;27(2):161–73. DOI: https://doi.org/10.4314/just.v27i2.3305

Sil MSMDSCSS. Assessment of lung function among the workers in plywood industries. Vasc Endovasc Rev. 2025;8(19):223–30. DOI: https://doi.org/10.64149/j.ver.8.19s.223-230

Supapvanich C, Yeekew T, Pechayco G. Respiratory effects and pulmonary functions related to wood dust exposure among workers in a rubber wood factory. Health Sci J Thailand. 2024;6(2):90–7. DOI: https://doi.org/10.55164/hsjt.v6i2.265260

Noochana K, Puangthongthub S. Permissible but not protective: 11-year cohort evidence linking respirable rubberwood dust exposure to lung function decline in Thai workers. Environ Challenges. 2025;20:e101298. DOI: https://doi.org/10.1016/j.envc.2025.101298

Published

2026-11-19

How to Cite

1.
Bih FK, Chakurah I, Naah EM, Wahab A, Donkor MB. Assessment of Quality Control and Occupational Health and Safety Hazards in a Veneer Production Firm in Ghana. rev cuban salud trabajo [Internet]. 2026 Nov. 19 [cited 2026 Nov. 20];27. Available from: https://revsaludtrabajo.sld.cu/index.php/revsyt/article/view/1112

Issue

Section

Original articles